Introduction, Caution – Rice Lake RL50210 TA, 50-500 lb. Capacities Mild Steel User Manual
Page 3
3
1. Introduction
Rice Lake Weighing Systems’ 50210 TA/65059 Mini-Tank Weighing Assemblies
provide an easy-to-use, cost-effective, and reliable method for low capacity
weighing applications. They are ideal for installations where checking require-
ments are low. The flexible neoprene mounting system allows for bolting the units
directly to the mounting surface without extra plates or load buttons. The neoprene
pad also allows the vessel to expand/contract without restriction and provides a
degree of shock protection.
The 50210TA/65059 Mini-Tank Weighing Assemblies are available from 50-250
lb. capacities in zinc-plated or stainless steel versions using cantilever beam load
cells. In capacities from 500-2,500 lb., the units use single-ended shear-beam load
cells and are available in zinc-plated steel or stainless steel. 1K-2.5K capacities can
be fitted with RL35083 or RL35082 stainless steel, welded seal, IP67 load cell. This
is a non-part numbered special. Consult factory for quote information.
The installation should be planned by a qualified structural
engineer. Each installation is unique, and this manual is meant
to serve only as a general guideline for installation.
Authorized distributors and their employees can view or download
this manual from the Rice Lake Weighing Systems distributor
site at www.rlws.com.
Caution
Typical Mounting Configuration
1