Rice Lake 880 Performance Series Panel Mount Indicator/Controller - Profibus DP Interface Option Installation and Programming Manual - Manual (Page 6)

2 Profibus DP Installation and Programming Manual
2.0 Installation
This section describes the procedures used to install the Profibus-DP Interface into
the an indicator.
2.1 Installing the Profibus Interface
Figure 2-1. Profibus Kit
Disconnect power before removing indicator backplate.
Use a wrist strap to ground yourself and protect components
from electrostatic discharge (ESD) when working inside the
indicator enclosure.
1. Disconnect indicator from power source.
2. Unplug all connectors from the back of the controller assembly.
PN 156669 Backplate, Controller
PN 152358 Module, Profibus
PN 153093 Option Card
Also included in kit:
PN 14825 Screw, Mach 4-40NC x 1/4" Qty 4
J1
J2
J4
WARNING
CAUTION