Rice Lake 880 Performance Series Panel Mount Indicator/Controller - Profibus DP Interface Option Installation and Programming Manual User Manual
Page 7
Advertising
Installation
3
Figure 2-2. Remove Controller Assembly
3.
Rotate left and right hooks away from the DIN rail clip.
4.
Carefully remove the controller box from the DIN rail.
5.
Disconnect the display cable harness.
6.
Loosen the four corner screws and carefully pull the backplate straight out
from the enclosure. The boards are still connected to the backplate and will
slide out of the enclosure.
All boards will slide out together, the power supply board and the CPU
board are connected by a cable.
Figure 2-3. Remove Backplate With Boards
Rotate left and right
clip down away from
the DIN rail.
Controller
Assembly
DIN Rail Clip Bracket
Cable Assembly
DIN Hook
Screwdriver Slot
Note
Advertising