Rice Lake 920i Based Truck In/Out System - Manual (Page 16)

12 920i Based Truck In/Out Weigh Program
2.10 Diagnostics
Figure 2-17 shows an example of a 920i display of iQube diagnostic information. Information shown includes the
following:
• Cell name
• Cell deadload value (mV)
• Current individual cell and total values (mV)
• Number of weighments
• Cell status for highlighted cell. Use the indicator navigation keys to select cells.
Displayed deadload and current values are raw millivolt values. All diagnostic measurements use corrected mV
values:
corrected_value = current_value – deadload_value
Figure 2-17. 920i Diagnostic Display
The 920i diagnostic display can be shown by pressing the Diagnostic softkey (if configured).
In setup mode, diagnostic information can be shown by going to the VERS menu, pressing the Contact softkey,
then the Next softkey.
Access through the VERS menu also displays softkeys for Clear Diagnostics and, if cell emulation is enabled, Cell
Emulation . If cell emulation is set to AUTO2 or MANUAL2, a Snapshot softkey is also shown.
Note
10/22/07 08:05AM SCALE #1
Diagnostics
NAME DEADLOAD
0.1871
1.1509
0.7567
0.3791
0.0931
0.7079
CURRENT
0.2159
0.0547
0.7301
0.3583
0.1565
0.6655 A2-Load Cell 2
A3-Load Cell 3
A4-Load Cell 4
A5-Load Cell 5
A6-Load Cell 6
A7-Load Cell 7
System 1
44 weighments over 1000 grads 17.24608
Cell OK
Previous Done
Cell
Emulation
Next