3 truck, 4 project, 3 truck 2.4 project – Rice Lake 920i Based Truck In/Out System User Manual
Page 9
Supervisor Mode
5
2.3
Truck
1. Select
3
-
Truck
, from the Supervisor’s main menu to access the truck parameter screen.
Figure 2-6. Truck Entry Screen
2. Enter the field number to be edited on the numeric keypad. The following table lists the amount of characters
allowed for each field.
3. Using the
up/down
navigation keys, to scroll through the alpha-numeric to edit or enter the truck information.
4. Press
Save
softkey to save the values. Additional entries can be made by using the navigation keys to add
additional truck numbers.
5. To store a tare value taken from the scale, press the
2
key after selecting an ID and press
enter
with nothing
entered. This stores the the current weight on the scale as the tare.
6. When complete, use the
Menu/Cancel
softkey to go to the Supervisor Main Menu screen.
2.4
Project
1. Select
4
-
Project
from the Supervisor’s main menu to access the project parameters screen.
Figure 2-7. Project Entry Screen
Field
Characters Allowed
ID
16 character alphanumeric
Tare
Numeric (keyed or from scale)
Descrip
20 character alphanumeric
Accum
Can’t edit/view only
Table 2-3. Truck Entry Character Parameters
Exit to
Weigh
10/22/07
08:05AM
SCALE #1
1
2
3
4
7
6
5
ID
Tare
Descrip
Accum
Enter Selection Number
Menu/
Cancel
Trucks
Exit to
Weigh
10/22/07
08:05AM
SCALE #1
1
2
3
4
7
6
5
ID
Name
Descrip 1
Descrip 2
Enter Selection Number
Menu/
Cancel
Projects
Accum