Rice Lake 920i Custom Grain Program - Manual (Page 10)

Supervisor Mode 7
4.0 Supervisor Mode
The supervisor mode allows the operator to add and delete grains and contracts, print the totals for all the grains
and contracts, clear the totals for individual or all the grains or contracts.
The enter the supervisor mode, press the Supervisor Mode softkey. The indicator prompts the user to Enter
Password .
Key in the password, (default password is 2349171), and the following supervisor softkeys are displayed.
Figure 4-1. Supervisor Softkey Menu
There are eight softkey parameters that can be edited through the supervisors menu. They are:
• Edit Grains
• Edit Contracts
• Time/Date
• Change Password
• Shrink Calculation
• Printer Port
• Remove Trucks
• Message
4.1 Edit Grains
Press the Edit Grains softkey on the 920i to access the editing grains parameters. The following screen is
displayed.
Figure 4-2. Edit Grains Parameter Softkeys