3 changing supervisor password, 4 change time and date – Rice Lake 920i Custom Grain Program User Manual
Page 13
10
920i Grain Program
contract report is shown below.
Figure 4-12. Contract Report
2. To view an individual contract, the operator
presses the
Add Contract
softkey. The
indicator prompts,
Enter Contract Number
.
3. Key in the known contract number followed
by the
Enter
key. The 920i displays the
contract information.
4. If the operator presses the
key, an
individual contract report is printed.
5. If the operator presses the
CLR
key, the total
for that individual contract is cleared to 0.
4.3
Changing Supervisor Password
Press the
Change Password
softkey to change the
default password. The following screen appears.
Figure 4-13. Enter Password
1. Key in the new password, followed by the
Enter
key.
2. The indicator prompts,
Re-Enter to Verify.
The
operator re-enters the new password followed
by the
Enter
key.
Note that once the password is changed, there is no way
to recover the old password.
4.4
Change Time and Date
The user can change the time and date on the indicator
by pressing the
Time/Date
softkey.
1. The indicator prompts the current time and
waits for the operator to key in the new
24-hour time.
Figure 4-14. Time and Date Screen
2. Key in the time HHMM followed by the
Enter
key. The indicator then displays the current
date and waits for the operator to key in the
new date
3. Key in the new date MMDDYY followed by
the
Enter
key. The new time and date is now
set.