Rice Lake BenchMark SLHE - Manual (Page 7)

Introduction 3
1.3 12", 18" and 24" Models
Larger models in the series use mild steel frames and stainless steel deck covers for light washdown with a damp
sponge. All models are available with mild steel or optional stainless steel underbody frame construction. The
standard load cell is a single point load cell. Options include a stainless steel RL1140 load cell for 12" x 12" and
12" x 18" models and protective stainless steel clamshells for all models using a single point load cell. All load
cells come with 10 feet of cabling.
Top Frame
Overload Protection Screw
Overload Stops
Figure 1-3. 12" x 12" With Overloads
These medium-capacity bench scales provide overload protection for the load cell by positive stops located beneath
each corner of the top frame (see Figure 1-3). These stops are set at the factory for 100% of scale capacity.
Additional overload protection is provided by an overload screw beneath the load cell to help prevent shock
damage.
1.4 12" x 18" Stainless Steel
The 12" x 18" model has a stainless steel cover and underbody frame to meet USDA requirements and make it
ideal for washdown use. The 12" x 18: comes standard with a single point load cell; a stainless steel load cell is
optional for both the 50 lb and 100 lb models. Extra load cell protection is available with the optional stainless steel
“clamshell” that encloses the load cell. See Section 5.0 for information about clamshell installation. All load cells
come with 10 feet of cabling.
These medium capacity bench scales provide overload protection with positive stops located beneath each corner
of the top frame. These stops are set at the factory for 100% of scale capacity. Additional overload protection is
provided by an overload screw beneath the load cell to help prevent shock damage.