Rice Lake CRS-Certificate Retrieval System - Manual (Page 8)

4 Certificate Retrieval System User’s Guide
2.2.2 NIST Info
NIST numbers must be added to the system to help
identify weights for certification.
Figure 2-4. NIST Certificate Information Page
To add NIST certification,
1. Select NIST Info under Admin on the
navigation bar.
2. Click the Add NIST Cert button.
3. Enter the NIST Certificate Number,
Calibration Date and the Recal Date.
4. When finished click the Save NIST Cert
button.
NOTE: Saved NIST information cannot be edited.
Figure 2-5. Add a NIST Certificate Page
2.2.3 Device Classes
Device classes are used to setup the type of device
classes to be calibrated. Add each class you will be
using in the system.
Figure 2-6. Device Class Information Page
To add device class information,
1. Select Device Classes under Admin on the
navigation bar.
2. Click the Add Device Class button.
3. Enter the device class name.
4. When finished click the Save Device Class
button.
Add each device class of the scale you will be testing
with the system.
Figure 2-7. Add a Device Class Page
2.2.4 Weight Kits
Weight Kits come in individual weights or kits
containing multiple weights. These weights are
certified and are used for certification. It is very
important that these weights be accurate and can be
traced back to a NIST number.
Figure 2-8. Weight Kit Information Page
To add a single weight or a series of sequentially
numbered weights,
1. Select Weight Kits under Admin on the
navigation bar.
2. Click the Add Weight Kit button.
3. Enter in the information for the weight paying
particular attention to assigned truck, unit of
measure, weight value, NIST Number, and
weight serial number (or sequence of numbers
for a batch of weights).
4. When finished click the Save Weight Kit
button.
Figure 2-9. Add a Weight Kit Page