2 entire member search – Rice Lake Upper Body Single Frequency Composition Analyzer - D1000-2 - Pass Plus Software User Manual
Page 24
20
Body Pass Plus Software Program
2.3.2
Entire Member Search
Click on the
Entire Member List
button on the right side of the main screen, then the entire member search screen
appears as shown below.
1. There are several ways to search for a member.
•
Place the cusor in the middle of the screen and right-click the mouse to choose the searching option.
•
Or click the
Displaying
button and the search option window appears.
•
Or click
Search Option
button between the three tables and the search
option window appears.
Assign all data, ID or measured date to be searched in the search option window and click the
Search
button, then
the searched member appears in the upper table like the graphic shown below.
2. Click on a member in the upper table; measured information of that member is displayed in the lower table.
3. Double-click one in the lower table, the result sheet of the measurement appears.