Setup, System – Rice Lake Intercomp SWII Portable Vehicle Scale User Manual
Page 5
Advertising
SWII Users
Rev I, May 2009
Page 5 of 11
Setup
System
System setup configuration
1. Place the four pads near their appropriate car tire: LF by left front, RF by right front
and so on.
2. Connect one end of each cable to a pad: LF-Red cable, RF-Green cable, LR-White
cable, RR-Black cable.
3. Connect the free end of each cable to the control box: LF-Red cable, RF-Green
cable, LR-White cable, RR-Black cable.
4. Turn the indicator on.
5. Jack the car onto each pad.
.
Advertising