Rice Lake Mobile Group Animal Scale - MAS-M - Operators Manual - Manual (Page 17)

Assembly 13
2.3.4 Complete Cage Assembly
1. Install the 5/16” carriage bolts and serrated nuts with the head of the bolts on the
inside of the cage. Begin by tightening the bolts from the center of the sheet
section working outward.
2. Tighten the 3/4” x 3 1/2” bolts installed in Section 2.3.2.
3. Assemble the latch with 3/8 x 3 1/4” bolts, lock washers, nuts and the latch pin
with the supplied hardware.
Figure 2-7. Latch Assembly
4. Install the 3/4” EVA hose on the latch pin (Mobile units only).
5. Adjust the gates and latches per the adjustment procedure.