Rice Lake Mobile Group Animal Scale - MAS-M - Operators Manual - Manual (Page 25)

Towing Instructions 21
14.Unpin the hitch and swing both hitch halves clear.
The hitch sections can be removed. To remove the hitch, remove the pins
from the scale end of the hitch arms, and pull all wiring through the
driver’s hitch tube.
15.USING BOTH HANDS, raise the platform (rotate cam handle in
direction indicated by decal) to enable the scale (see Figure 3-5).
Figure 3-5. Scale Lift
The lift mechanism is an over center cam style lift and lock. If not
disturbed, the scale will remain “locked” in the up (weigh)
position. Always grip lift handle with two hands when raising and
lowering the scale.
Cam levers point toward each other in weigh mode and away from each
other in transport. See decals for direction of levers in each mode.
16.Ensure the weigh center power switch is in the ON position. Verify the indicator
does not show out of level. If it does, shim the scale as necessary (see steps 11-
13 above).
17.The weigh indicator should be powered up. The readout of GROSS weight on
the indicator should be near zero (within four percent of the scale capacity). If it
is not, ensure the scale is fully lifted and that there is no debris on or under the
scale.
Figure 3-6. Scale in Weigh Mode
Note
Rotate Cam To
Raise Scale Into
Weigh Position
(See Decal)
WARNING
Note