Rice Lake Loadrunner Dump Truck Systems Kit - Manual (Page 7)

Load Pin and Transducer Specification 3
2.0 Load Pin and Transducer Specification
The Rice Lake Roll Off and Dump Truck kits are typically LIFT-TO-WEIGH KITS. This means that with the hoist
in the relaxed state (on the chassis), no weight reading is available. The hoist needs to be elevated to a position
showing the correct angle on the in-cab digital display unit, approximately four degrees, for the weight reading
degrees to be valid and accurate.
Note
This manual provides instructions for the installation of straight frame dump trucks and “pup” dump trailers only.
For information on full frame or frame-less end dump or side dump trailers, please refer to the Rice Lake
Precision Loads manual (PN 115094).
2.1 Onboard Dump Truck Kit Parts
3
4 1
5 6
7
2
2
8
9
10 11
12 13
15
14
Figure 2-1. Onboard System – Dump Truck Kit Illustration
Table 2-1. Onboard System – Dump Truck Kit Parts List
Item No. Part No. Description Qty
1 119966 Support, 1 x 4 x 5.16 1
2 119963 Ring, .25 x 2.25 x 3 4
3 131207 Pin, Load Dump Truck 2
4 119974 Glass Tubing 2
5 119973 Load Cell Mount Weldment 2
6 119969 Weldment, Support Ring 2
7 153117 Screw, Cap 1/2-20NF x 5” 2
8 Nut, Top Locking 2
9 131800 Cable Assembly 6’ 3
10 131226 Splitter, Cable Y-Splitter 1
11 131222 Inclinometer, Onboard 1
158196 Bracket, Onboard Inclinometer 1
12 131228 Cable Assembly 15’ (5M) 1
13 131200 Transducer, Hydraulic 1
14 131219 Indicator, OB3502 Channel 1
15 131221 Cable Assembly Fuse 1