Rice Lake Mechanical Beam Baby Scale RL-MIS-20 (KG Only) User Manual
Page 7
Advertising
Mechanical Baby Scale Installation and Operation Instructions - Installation Instructions
3
3. Insert the pillar into the scale base assembly ensuring that the RLWS logo located on the weigh beam
faces the
Scale base
Pillar
scale base.
Figure 2-2. Attach the Pillar to the Scale Base
4. Using a phillips head screwdriver, screw in the eight bolts and washers to secure the pillar to scale base.
Figure 2-3. Attach Eight Bolts and Washers to Secure the Pillar to the Scale Base
Advertising
This manual is related to the following products: