Rice Lake Mechanical Chair Scale (RL-MCS) - Manual (Page 10)

6 Mechanical Chair Scale Installation and Operation Instructions
Figure 2-10. Slide the Footrest Assembly So That Holes Line Up
Once the footrest is secured and the screws tightened for it, secure the molded seat onto the chair scale
frame.
6. Secure the four screws (shown below).
Figure 2-11. These Screws Hold The Molded Chair to the Scale Base
2.5 Arm Rest Installation
The last item to be installed on the mechanical chair scale are the two arm rests.
Figure 2-12. Detachable Arm Rest for the Mechanical Chair Scale
Use the following steps to attach the two arm rests to the mechanical chair scale molded seat.
Push footrest assembly back
so that the holes line up.
Secure screws (only one
shown)