Rice Lake MSI-9850 CellScale RF Digital Indicator - Ethernet Option Supplement - Manual (Page 8)

MEASUREMENT SYSTEMS INTERNATIONAL
To view information about the scale Ethernet interface use “Device Information”.
To configure the device use the “Configure” button to open a dialog where you can adjust the network
settings to use DHCP or manually enter a the IP address information.
After entering the desired network configuration select OK to send the configuration to the scale. After
sending the configuration, you will have to apply the settings with the “Reboot Device” button.
Page 8 of 20
Illustration 3: Scale Discovery Utility - Device Information
Illustration 4: Scale Discovery Utility - Configure