1 set print mode, Scales and balance mode (statistical), Tape printer mode (non-statistical) – Rice Lake Prove Statistical Printer User Manual
Page 10
6
3.1
Set Print Mode
There are two ways to set up the print mode on the Prove statistical printer.
• Print everything on a label
• Scales and balance mode
Scales and Balance Mode (Statistical)
1. Power on the printer
2. Press and hold the
CONFIG
button until the LED on the unit flashes.
3. Release the
CONFIG
button and press 10 times.
4. After five seconds, the LED will flash 10 times.
5. Press the
CONFIG
button.
6. After five seconds the LED will flash twice and reset.
Tape Printer Mode (Non-Statistical)
1. Power on the printer
2. Press and hold the
CONFIG
button until the LED on the unit flashes.
3. Release the
CONFIG
button and press 10 times.
4. After five seconds, the LED will flash 10 times.
5. Press the
CONFIG
button twice.
6. After five seconds the LED will flash twice and reset.
6
Print Density
Lowest
1
2
3
4
7
Printer Current
Highest
1
2
3
4
8
Print Format
Standard paper, normal printing
Standard paper, upside down
printing
Labels, normal printing
Labels, upside down printing
1
2
3
4
9
Sleep/Wake-up
Never sleep
Sleep after one minute
Sleep after two minutes
Sleep after five minutes
Sleep after ten minutes
Off, one minute
Off, two minutes
Off, five minutes
Off, ten minutes
1
2
3
4
5
6
7
8
9
Option
Numbers
Description
Settings
Setting
Number
Table 3-1. Configuration Options