Rice Lake Mechanical Stationary Animal Scale - MAS-LM - Manual (Page 10)

Center Uprights
1/2 ”-13NC x 1 3/4”
Screw
1/2 ” Lock Washer
1/2 ” Flat Washer Type B
Gate
Upright
Gate
Upright
Frame
Important
6 Rice Lake Stationary Livestock Scale Operator’s Manual
5. Install the two internal upright assemblies and the two gate upright assemblies to the base frame using the
hardware provided. See Figure 2-3.
Do not tighten hardware at this time, it will need to be loose to allow for wall panel installation.
Upright and wall installation should be done with two people or an overhead crane.
Figure 2-3. Install Internal Overhead Assemblies
6. Align holes in wall panels with holes in uprights and secure in place with provided hardware.
7. Tighten hardware for the wall panels then tighten hardware securing the uprights to the frame.
Important
At center uprights, hardware will go through two wall panels (one on each side of the upright).