Rice Lake Mechanical Stationary Animal Scale - MAS-LM - Manual (Page 8)

4 Rice Lake Stationary Livestock Scale Operator’s Manual
2.0 Assembly and Installation
2.1 Unloading
The unit is very heavy.
DANGER
Ensure that adequate straps are used for lifting the scale and that straps are in the
proper location. See Table 2-1 for strap lengths.
Ensure no one is under the scale when lifting and moving to the location selected.
2.1.1 Slinging the Scale
MAS-LM animal scales can be slung with four equal length straps connected from the lifting lugs to a single point
in the center.
Table 2-1. Minimum Strap Length Required for Lifting
Model Minimum Strap Length
22x10 13 ft
22x8 12 ft
19x8 10.5 ft
17x8 9.5 ft
15x8 9 ft
13x8 8 ft
Lift from the lifting lugs (inside of frame) using lifting straps
or chains and an overhead crane.
Figure 2-1. Slinging the Scale
2.1.2 Lift the Scale
1. Lift the scale using adequate lifting straps and device.
2. Place on a prepared location, a firm surface that is straight, plumb and level. Store scale on the same type of
surface.
2.1.3 Weighcenter Package Removal
The weighcenter is boxed and shipped on a separate skid with the scale. Be careful when removing the packaging
to avoid damaging the weighcenter.
Note
Please recycle the packaging material.
Place the parts safely in a location where they will not be damaged.