2 install pc board for option – Rice Lake TC Series, Rice Lake Weighing Systems - RS-232 Option Card Installation Manual User Manual
Page 6
Advertising
Install PC Board for Option
2
1.2 Install PC Board for Option
1.
Install PC board to the chassis. See Figure 1-3 and Figure 1-4.
Figure 1-3. Insert PC Board
Figure 1-4. Installed Board
2.
Insert connectors into SJDP board.
Figure 1-5. Connector to Board Location
3.
Cover the case and put RS-232C label on the output terminal.
Figure 1-6. Label Location
Insertion Point
I n s e r t
connectors of
the PC board.
Label
Advertising