0 calibration, Calibration – Rice Lake Tracer AVi - v1.0 User Manual
Page 17
Advertising
Calibration
13
4.0
Calibration
VIRTUi Calibration
With the
iQube
connected to a PC running the
VIRTUi
program, do the following:
1. From the
Settings
menu, select
Calibration
then
Multi-Point.
Figure 4-1. Platform Selection
2. Remove all weight from the scale platform. Click on
Calibrate
. The word
Transmitting
is displayed while
the zero value is calculated. This process can last up to 45 seconds.
Figure 4-2. Calibration
3. Enter the test weight value in the
Calibration Weight
field. You are now ready to measure the load cell
output using the Multi-Point procedure.
Advertising