Rice Lake Tracer AVi - v2.0 - Manual (Page 15)

PC Configuration 11
Zero Scale
1. In gross mode, remove all weight from the
scale and wait for the standstill annunciator.
2. Press the Zero key. The Center of Zero
annunciator lights to indicate the scale is
zeroed.
Acquire Tare
1. Place container on scale and wait for standstill
annunciator.
2. Press the TARE key to acquire the tare weight
of the container. The indicator switches to net
mode.
Remove Stored Tare Value
1. Remove all weight from the scale and wait for
the standstill annunciator.
2. Press the TARE key. The indicator switches to
gross mode, indicating the tare value has been
removed.
Print Ticket
1. Wait for standstill annunciator.
2. Press the Print key to send data to the serial
port.
3.1.5 Web Browser-Based Cell Status
iQube load cell status can be reported via a standard web browser. A “http://localhost:5050” URL is used to view
the status page. “Http” must be included as it is not inferred, and “localhost” can be replaced with the appropriate
IP address or domain name.
Figure 3-9. Cell Status
3.1.6 System Requirements
Minimum
• Windows 98 or greater
• Internet Explorer 5.5 or greater
• .NET Framework 1.1
• 64 MB RAM
• 30 MB free hard drive space
• Serial port connection for connection to iQube
Additional serial ports are required for connection to
printers/remote displays.
Recommended
• Windows 2000 or greater
• Internet Explorer 6.0 SP1
• .Net Framework 1.1
• 128 MB RAM
• 30 MB free hard drive space
• Serial port for connection to iQube
Additional serial ports are required for connection to
printers/remote displays.