Rice Lake Wireless Wheelchair Scale D300 Series - Manual (Page 12)

8 D300 Series Wireless Wheelchair Scale Installation & Operation Manual
4.3 Options Menu
There are several options available on the D300 Series wireless wheelchair scale. To access those options, press the
upper-right display button on the handheld controller.
Setup/Options Button
Figure 4-3. Setup/Options Button Location
4.3.1 Help
This option includes basic written facts to help with setup and ease of use.
• Getting Started provides general information on how to get started using your scale.
• Using Quick Weight provides a quick weight reading with patient and chair without the ability to save to
the patient database.
• Weighing Patient + Chair provides a quick weight reading with patient and chair without the ability to
save to the patient database.
• Helpful Hints gives helpful way to achieve the best results and functionality.
4.3.2 Beep Preference
The D300 Series wireless wheelchair scale system is designed with beep alerts.
The controller is defaulted to
Never
.
Lost Pad Connection
can also be selected and will alert the user if there is an error or obstruction preventing clear
communication with the scale pads.
Additional beep preference settings are available but because they are associated with patient database information,
are only available in the D300 Series service manual.
4.3.3 Date & Time
This option is for setting the current date and time. Use the following steps to set up date and time.
1. To enter the current year, use the up and down arrows to enter find the current year and press the
OK
button.
2. To enter the current month, use the up and down arrows on the controller to find the current month and
press the
OK
button.
3. To enter the current day, use the up and down arrows on the controller to find the current date and press the
OK
button.
4. To enter the current hour, use the up and down arrows on the controller until the correct hour appears then
press
OK
.
5. To enter the current minutes, use the up and down arrows on the controller until the correct minute appears,
then press
OK
.
4.3.4 Deep Setting
This option is pass code protected for changing functionality in much more detail. Additional information on deep
settings are only available in the D300 Series service manual.