Rice Lake Zebra GK420d - Manual (Page 67)

55 Maintenance
Cleaning
12/14/07 GK420d User Guide 980608-001 Rev. A
5. Install the platen in the printer. Discard the cleaning swabs after use - do not reuse.
6. Make sure the bearings are on the shaft of the platen.
7. Align the platen with the gear to the left and lower it into the printer’s bottom frame.
8. Rotate the tabs back and snap them into place.
Allow the printer to dry for one minute before closing the dispenser door, media cover or
loading labels.