Rice Lake Zebra GK420d - Manual (Page 84)

Universal Serial Bus (USB) Interface
72
980608-001 Rev. A GK420d User Guide 12/14/07
Universal Serial Bus (USB) Interface
The figure below displays the cable wiring required to use the printer’s USB interface.
The printer requires cable or cable packaging that bears the “Certified USB™” mark to
guarantee USB 2.0 compliance.
For printer supported operating systems and drivers, see the software and documentation
CD or visit the Zebra printer web site at:
http://www.zebra.com
For information on the USB interface, go to the USB web site at:
http://www.usb.org
Pin Signal
1 Vbus - N/C
2 D-
3 D+
4 Ground
Shell Shield / Drain Wire
1 2
3 4