Seca 763 printer-module - Manual (Page 12)

12
… the printer prints out during weighing but only special characters appear on
the printout?
– The printer was switched off during the previous printing operation. Switch off the scale
and restart. Only switch off the printer after printing.
… the printout is incomplete (there is no date and the printout has not been fed
out far enough)?
– The load must first be removed from the scale before printing can finish. None of the
scale functions should be activated either.
4. Spare parts and accessories
Spare parts
Model-specific mains power unit
Plug-in mains power unit, world-wide: 230V~ / 50Hz / 12V= / 1,25A
seca no. 68-32-10-263
Accessories
Thermal paper, roll 28x57mm
seca no.: 12-05-02-206