Product description, Prerequisites and preparation, Figure 1 ac power supply – Cisco 10005 User Manual
Page 2
Product Description
2
Cisco 10005 ESR AC Power Supply Installation
78-12652-01
Product Description
The AC power supply (
) provides power conversion directly from the
facility AC input power (100 to 240 VAC nominal) to the –48V VDC used
internally by the system. Power is delivered to the power supply by the AC power
cord. The AC power supply is provided with an IEC 320/C20 AC inlet, rated
16A/250V (20A in North America).
Figure 1
AC Power Supply
The Cisco 10005 chassis has two compartments for power supplies. The chassis
can operate with a single power supply; install two power supplies if you need
power redundancy.
Prerequisites and Preparation
Before you perform any of the procedures in this guide, we recommend that you:
•
Read the safety guidelines in the next section and review the electrical safety
and ESD-prevention guidelines in the Cisco 10005 ESR Hardware
Installation Guide.
•
Ensure that you have all of the necessary tools and equipment (see the
“Required Tools and Equipment” section on page 6
).
53616
CAUTIO
N
THIS UNIT H
AS MORE
THAN
ONE PO
WER
SUPPLY CO
RD. DISC
ONNECT TW
O (2)
POWER SU
PPLY CORD
S BEFO
RE
SERVICING
TO AVOID ELECTRIC
SHOCK.
CAUTIO
N
POWER
FAULT
100-240V
50/60 HZ
15-7A