Tayama MB-YC50D - Manual (Page 14)

12
TROUBLESHOOTING
Indicator light is
not bright and/or
electric tray is not
warm.
Electric tray is hot.
• Power supply is not connected
to circuit.
• Power wiring board is damaged.
• Circuit connection broke down.
• Master circuit board is
damaged.
1. Inspect the switch, plug and
socket to ensure that they are
all properly connected and on.
2. Send to designated service
technician.
Indicator light is
bright and/or
electric tray is not
warm.
• Temperature controller has
malfunctioned.
• Electric-thermal tube is burnt
out.
• Circuit board is disconnected.
• Power circuit board is
damaged.
Send to designated service
technician.
Rice is not
properly cooked
and/or cooking
time is too long.
• Keep warm time is insufficient.
• Electric tray is damaged.
• Interior pot is not in place
properly.
• There is foreign matter between
the inner pot and electric tray.
• Inner pot is damaged.
• Master circuit board is damaged.
• Temperature control is damaged.
1. Adjust inner pot to make sure
it is placed properly.
2. Make sure inner pot and
components are clean.
3. Contact Aroma’s customer
service to order a new inner
pot.
4. Send rice cooker to
designated service technician.
Rice is burnt
and/or cannot
keep warm
automatically.
Overflow occurs
when making
porridge.
• Master circuit board is damaged.
• Temperature control is damaged.
• Master circuit board is damaged.
• Temperature control is damaged.
• There is foreign matter in the
steam valve.
Send to designated service
technician.
1. Wash the steam valve.
2. Send to designated service
technician.
Rice or porridge
does not boil after
a great length of
time.
• Master circuit board is damaged.
• Temperature control of cover is
damaged.
Send to designated service
technician.
Problem Possible Causes Solutions
Huarun Appliance Inc.
2660 River Ave.
Rosemead, CA 91770
Tel: (626) 280-6679 Email: [email protected]
Fax: (626)280-8589 Website: http://www.tayama.us
Toll Free: 1-866-9TAYAMA or 1-866-982-9262