Clarion VMA773 - Manual (Page 15)

15
Adjusting the picture
If the temperature is normal and the picture still doesn’t look right, you may
adjust the tint, color, brightness, and contrast.
1. Press MENU key to display the picture adjustment menus.
The monitor displays the adjustment menus.
2. Press MENU key again until you reach the option you wish to adjust.
The monitor displays the adjustment bar as below.
TINT adjusts the tone of color. ( only for NTSC )
COLOR adjusts the color saturation .
BRIGHT adjusts the monitor’s brightness.
CONTRAST adjusts the differences between light and dark areas.
3. Press
the  ( up key ) controls button to increase the adjustment .
Press the  ( Down key ) controls button to decrease the adjustment .
Each setting has 30 steps of adjustment range and is preset to 15 at the
factory .
Once you’ve adjusted the picture , wait a moment and the adjustment menus
disappear .