Clarion VMA773 - Manual (Page 18)

18
Returning adjustments to the factory settings ( Reset )
1. Press MENU several times to locate the RESET option.
2. Press either down () or up () to reset the settings.
If you don’t wish to reset the settings, either press MENU again or wait
for the monitor to exit the picture adjustment menus automatically.
Note :
y
If you reset the options and the monitor was set to source2 ( AV2 ), the
monitor reverts to the default setting of AV1. If there is no active video
source on AV1, the screen may go dark. Press SOURCE to switch the
monitor back to AV2.
y The reset settings only valid for the Tint, Color, Brightness, Contrast,
Volume that setting those parameter back to default value 15, and set to
IR CHA, AUTOPOWER ON.
Remote IR Function
The LCD monitor comes with an IR receiver that works with Clarion remote
control devices. Aim the remote control at the IR receiver during use.
Note:
The IR receiver only functions with select Clarion multimedia equipment.