Clarion VMA773 - Manual (Page 23)

23
Installing the monitor
Flush mounting in the headrest
You may use the included bezel to mount the monitor.
1. Ensure that you will have sufficient clearance for the monitor and its
rear-located wiring harness.
2. Cut
the opening.
3. Route the pigtail cable end of the wiring harness into the opening from
the rear out the front.
4. Insert the bezel and route the wiring harness through the opening in the
rear.
5. Firmly attach the bezel to the mounting surface and/or to the interior of
the mounting surface.
Mounting tabs
Mounting screw holes
Wire harness opening