Thetford 902 Topline - Manual (Page 5)

5
Operation/Function Touch Controls L.E.D. Display
1. Ensure the power supply is connected and turned on
2. Switch On:
If no function activated
after 10seconds system
will switch to standby.
Touch the Power On/Off
symbol until it beeps.
The display for each heat zone
will illuminate as shown.
3. Heat setting For each zone, touch the
symbols to select required
heat.
The heat setting is
adjustable during cooking
by touching either symbol.
The heat setting is adjustable
between 1 & 12 for each zone.
4. Pan detection Either heat zone will only function
with a pan in place. When pan
removed or not present the
display flashes & shows the
following symbol.
5. Switch Off zone heating
With both Heat Zones
switched Off, system is in
standby mode. For each zone, touch
symbol until ‘0’
appears on the display or
touch and hold both
symbols.
When the zone is switched Off
the display will illuminate as
shown
6. Switch Off Induction Hob.
To Switch Off completely
turn off power supply.
Touch the Power On/Off
symbol until it beeps.
Illuminated display is blank.
7. Pause/Resume
Pause function only
operates for a period of
10minutes. After this period
system automatically goes
to standby.
To Pause touch
until it beeps.
To Resume touch
until it beeps and
then touch any other
symbol to resume cooking
on previous heat setting.
Both zones are paused and their
displays illuminate as shown.