ThingMagic Astra - Manual (Page 28)

Networking the Reader
Astra User Guide 28
Using DHCP
To use DHCP to automatically assign your PC's IP address to the Reader:
1. Select Start from the Start bar, and then select Control Panel.
2. Double click the Network Connections icon.
3. Disable your PC's wireless connection, if one exists.
4. Double click the Local Area Connection icon.
The local area Connection Status window appears, as shown in
Figure 5 .
5. Click the Properties button.
The Local Area Connection Properties window appears, as shown in
Figure 6 .
6. Scroll down to the bottom of the list and select Internet Protocol (TCP/IP).
7. Click on the Properties button.
The Internet Protocol (TCP/IP) Properties window appears, as shown in
Figure 11 .