ThingMagic Nomad RFID Setup Guide - Manual (Page 13)

Nomad RFID Reader Setup Guide 13
Before Running the RFID SearchLight Software
Before running the RFID SearchLight software, several Nomad features may be enabled.
These include:

GPS (If tag location desired)

Local time zone
Enabling GPS
For all Nomads, follow these steps to turn on GPS:
NOTE: Please make sure SatViewer is not running in background. If it is, exit SatViewer and
restart it after completing the following steps.
1. Click Start. The Start dropdown menu displays.
2. Click on Settings. The Settings window displays.
3. Click on the System tab.
4. Click on the GPS icon. The GPS Settings pane displays.
5. Click on the Access tab. The GPS Settings Access tab displays.
6. Check the check box Manage GPS automatically (recommended). A check mark
displays.
Final assembly of the USB bumper before USB cable installation