Torbal AGC Series Quick Reference Guides User Manual
Page 4
AGC Series: Quick Reference Guide
2.
If an over limit has already been set and no change is necessary, press “T” (YES) to accept and continue. If you
wish to change the setting, press the “0 (NO)” key. To set a new weight limit use the table shown in step1.
To Accept
To Change
3. Place a container on the pan and press “T” to tare.
4. To perform check weighing place your object on the pan to check whether the weight of the object falls within
the designated range. The weight of the object and the result will be displayed sequentially.
For a detailed description of this feature please turn to Chapter 8(C) of the instruction manual.
For technical questions or assistance please call toll free: 1-866-473-6900
Fulcrum Inc.
23 Carol Street.
Clifton, NJ 07014
(973) 473-6900
2