Tycon Power TP-SSW5(-NC) - Manual (Page 5)

User’s Manual TYCON TP-SSW5(-NC)
TYCON POWER SYSTEMS 5
*PoE LED(the left indicator on RJ45)
LED STATUS Description
P1~P4
PoE
Yellow LED ON if with PoE output.
Off No PoE output.
*Power wiring
The PoE switch family includes 2 models, be used for different ranges of input voltage as,
Current model (2A maximum) ……….full range voltage (10 to 57VDC) (TP-SSW5-NC)
802.3af/at model…………………………48VDC typical (44 to 57VDC) (TP-SSW5)
For 802.3af/at model operation, make sure your power supply may offer at least 75W for 4x 802.3af
PoE port, or 150W for 4x 802.3at PoE port. For current model operation, please make sure the
output current don’t over 2A per port.
.For 802.3af/at operation, the input voltage must be in the range of 44 to 57 VDC. Otherwise, the
PoEswitch will function only as an Ethernet switch but will not provide any PoE power output.
The PoE ports will deliver output of DC over the spare pairs of the RJ45 connection:
* TX on lines 1 and 2
* RX on lines 3 and 6
* V+ on line 4 and 5
* V- on line 7 and 8