Tycon Power TP-SSW5(-NC) - Manual (Page 9)

User’s Manual TYCON TP-SSW5(-NC)
TYCON POWER SYSTEMS 9
Flow control IEEE802.3x(full-duplex),back pressure(half-duplex)
Data transmission rate 148800pps for 100base-T, 14880pps for 10base-T
Address table 1K MAC address table, self-learning
Connect RJ-45
PoE port Port 1-4, auto power management
Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8)
Maximum PoE power IEEE802.3af – 16.8W
IEEE802.3at – 35W
Current limited – 2A
PoE disconnect mode DC disconnect
PoE auto detection IEEE802.3af & IEEE802.3at (2 event classification signaling)
PoE protection Over-temperature, over-current, over/under voltage
LEDs *Link/Activity (Green ON/ Green Blinking every 43ms @100Mbps/
Green Blinking every 120ms @10Mbps)
*PoE(Yellow) On-PoE output
*POWER Green-normal, Red-alarm
Power input DC(10V~57V).
Power consumption less than 5W when without PD loading
Input Voltage Input Current
12V 0.032A
24V 0.022A
48V 0.019A
56V 0.019A