Tycon Power TP-SSW5(-NC) - Manual (Page 6)

User’s Manual TYCON TP-SSW5(-NC)
TYCON POWER SYSTEMS 6
Rear panel terminal block wiring detail:
You could use the TP-SSW5(-NC) with our adaptor products as the below: (OPTION)
PSHP-18 PSHP-24 PSHP-48
Maximum output 18VDC/7.5A 24VDC/6.25A 48VDC/3.125A
Max. Output Power of
the TP-SSW5-(NC)
135W 134.5W 134.5W
*Ethernet Port Wiring
The PoE Switch supports Port 1 to Port 5 with automatic MDI/MDI-X crossover, autosense of the
speed and duplex for 10Base-T or 100Base-TX connections. Automatic MDI/MDI-X crossover
allows you to connect to other devices (switches, hubs, or workstations etc..), without regard to
using straight-through or crossover cabling.
Port 1 to port 4 also provides Power over Ethernet function which delivers DC power through the
spare pairs (pair 4,5 and pair7,8) to the PD.
The following tables depict the wiring diagram of straight-through and crossover cabling. The
crossover cables simply cross-connect the transmit lines at each end to the receive lines at the
opposite end.