Tycon Power TP-SW8(-NC) - Manual (Page 3)

User’s Manual TP-SW8
TYCON POWER SYSTEMS
3
1. General Information
The TP-SW8 POE Switch family provides a PoE/Data input port that is compatible with 802.3af
and 802.3at (Type 1 and Type 2) and it has seven 10M/100M TX ports with PoE PSE function. In
addition to the ability to accept standard 48VDC power on the Ethernet input Port 8, the
TP-SW8(-NC) provides 2 secondary DC wire terminal input ports for PoE switch operation from
12VDC to 58VDC. PoE output voltage is equal to the input voltage, making this switch as universal
voltage PoE switch. The PoE Switch can be used as an Ethernet/PoE repeater to extend Ethernet
data and DC power up to 200 meters. This manual will help you install and maintain the PoE switch.
Installation of the PoE switch is very easy and you will begin to operate as soon as you are powered
up. The TP-SW8 comes with DIN rail mounting clips for ease of mounting in network cabinets.
2. Hardware Description
*LED Indicator
There are 18 LEDs on the PoE switch to indicate the power and operational status. The following
section describes the functions of each LED indicator.
Front panel detail
the port number is as the diagram shows.
5 6 7 8
1 2 3 4