Tycon Power TP-SW8(-NC) - Manual (Page 9)

User’s Manual TP-SW8
TYCON POWER SYSTEMS
9
3. Model Information
Model
Input Voltage
(REAR)
Input Voltage
(Port 8)
Output voltage 802.3af/at
TP-SW8-NC 12-57VDC 12-57VDC
12-57VDC
(non-regulated)
No
TP-SW8 40-57VDC 42.5-57VDC
40-57VDC
(High voltage
output,
non-regulated)
Yes
4. Technical Specifications
Standards IEEE802.3/IEEE802.3u standards (10 base-T/100base-T)
Ports 8 ports with 7 PoE PSE & 1 PoE PD, supports auto-crossover &
auto-polarity
Transmission speed 100 Mbps(100base-T),10 Mbps(10base-T) Auto-negotiation
Switch technology store-and-forward
Protocols CSMA/CD
Flow control IEEE802.3x(full-duplex),back pressure(half-duplex)
Data transmission rate 148800pps for 100base-T, 14880pps for 10base-T
Address table 2K MAC address table, self-learning
Connect RJ-45
PoE port Port 1-7, Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8)
Port 8, 4 pairs PD