Tycon Power TP2700WC - Manual (Page 17)

17
d) IN HUMI TODAY MAX, IN HUMI TOTAL MAX – Maximum Indoor humidity.
e) OUT TEMP TODAY MAX, OUT TEMP TOTAL MAX – Maximum Outdoor temperature.
f) OUT HUMI TODAY MAX, OUT HUMI TOTAL MAX – Maximum Outdoor humidity.
g) ABS BARO TODAY MAX, ABS BARO TOTAL MAX – Maximum Absolute barometric.
h) REL BARO TODAY MAX, REL BARO TOTAL MAX – Maximum Relative barometric.
i) WIND SPEED TODAY MAX, WIND SPEED TOTAL MAX – Maximum Wind speed.
j) GUST SPEED TODAY MAX, GUST SPEED TOTAL MAX – Maximum Gust speed.
k) DEW POINT TODAY MAX, DEW POINT TOTAL MAX – Maximum Dew point
temperature.
l) HEAT INDEX TODAY MAX, HEAT INDEX TOTAL MAX – Maximum Heat index
temperature.
m) RAIN RATE TODAY MAX, RAIN RATE TOTAL MAX – Maximum Rainfall rate.
n) RAIN 24H TOTAL MAX – Maximum Rainfall within 24 hours.
o) RAIN WEEK TOTAL MAX – Maximum Rainfall within 1 week
p) RAIN MONTH TOTAL MAX – Maximum Rainfall within 1 month
q) RAIN YEAR TOTAL MAX – Maximum Rainfall within 1 year.
 Today min and total min:
Today min: The Maximum of 1 day
Total min: The Maximum of total since last reset
a) IN TEMP TODAY MIN, IN TEMP TOTAL MIN – Minimum Indoor temperature.
b) IN HUMI TODAY MIN, IN HUMI TOTAL MIN – Minimum Indoor humidity.
c) OUT TEMP TODAY MIN, OUT TEMP TOTAL MIN – Minimum Outdoor temperature.
d) OUT HUMI TODAY MIN, OUT HUMI TOTAL MIN – Minimum Outdoor humidity.
e) ABS BARO TODAY MIN, ABS BARO TOTAL MIN – Minimum Absolute barometric.
f) REL BARO TODAY MIN, ABS BARO TOTAL MIN – Minimum Relatively barometric
g) WIND CHILL TODAY MIN, WIND CHILL TOTAL MIN – Minimum Wind chill temperature
h) DEW POINT TODAY MIN, DEW POINT TOTAL MIN – Minimum Dew point temperature
Each Maximum/minimum value can be cleared by pressing SET key for 3 seconds during this
mode. Press the HISTORY key or wait for 30 seconds to return to Normal Mode.
5. History mode
In normal mode, press the history key to switch to history mode.
If no history data, it will show “HISTORY” and “NONE RECORD” in the message panel. Otherwise it
will display a message like “HISTORY P/R 1.01” and “YEAR / SECOND 13.06”.
In the example above: P means PAGE, R means RECORD. 1 is PAGE No., 01 is record No. Every
page includes 32 records of history data.
“YEAR / SECOND 13.06”. is a time stamp of the record. 13 means 2013 year, 06 is the seconds stamp.
The hour, minute, and date stamp will be shown in the time segment section of the display.
Press the +/ – key to switch to next / previous record.
Press the LEFT / RIGHT key to switch to next / previous page.