Tycon Power TP2700WC - Manual (Page 24)

24
9. Press Finish to finish the installation process and exit. If you tick “Launch Weather Smart”
the software will start to run.
10. Normally the installation process will install a launch icon on your desktop. Double click this
icon to open WeatherSmart anytime.
Note: The graphic function needs the software to be installed under the administrator account. If it
is installed under limited user accounts, the graphic function of the software might not be working
correctly.
3.0
Basic Settings of the “WeatherSmart” Software
After the “WeatherSmart.exe” program has been started, the following main window will
appear on the PC screen:
All the settings from the base unit are mirrored into the PC software, so once you have done your
settings on the base unit, then you don ’t need to make any setting changes on the PC software.
However you can still easily make any setting changes you wanted on the PC and the base station
will be updated automatically (the setting changes will be refreshed after 1 minute).
When the base station is connected to the PC, it shows “USB Connected” at the bottom of screen.
If no base station is connected, it shows “USB Unconnected”.
Tool Bar: The tool bar at the top of the screen has 4 options; System, Record, Upload and
Help.