Welch Allyn EarlySense System 1.0 - Equivalent to model EverOn 1.0 - User Manual - Manual (Page 49)

43
• After setting up the alerts, touch Submit to activate these settings or Cancel
to preserve the existing settings.
Note
In addition to changing the individual alert volumes as described
above, you can also change the general volume (See page 32) or by
setting volume and tone of all in the alerts setup screen. The alert
volumes are determined by which of the two parameters (General
or Alert) was set last.
Note
When a patient is admitted or discharged all alert settings will
return to default.
Warning
The Audible alert in the EarlySense System is not intended for
monitoring high risk situations where ECG monitoring is required.
The most reliable method of patient monitoring combines close
personal surveillance with correct operation of the monitoring
equipment
Silencing Alerts
A green bell icon indicates that the alert is active.
Silence alerts volume by setting the alerts volume to zero in either the general alerts
volume icon in the Home screen or in the Alerts Setup screen.
In case the alerts are silenced for a specific parameter the bell icon for the corresponding
parameter in the main screen will be displayed with a mute sign as follows:
Bed Exit
The EarlySense System tracks if there is a Bed Exit. This alert is disabled by default.