Welch Allyn CP 50 Plus 12-lead resting electrocardiograph - User Manual - Manual (Page 38)

Replacing the AC fuses
You might need to replace one or both of the AC fuses if the AC power indicator does
not light up when the electrocardiograph is connected to AC power.
WARNING Failure to unplug could result in electrocution.
To replace the AC fuses
If either fuse is dark or has a broken wire, replace the fuse. Line up the fuse case with
the opening; it goes in only one way.
Storing the equipment
When storing the electrocardiograph, cords, and accessories, observe the environmental
storage conditions that are identified in the product specifications.
Discarding the equipment
Discard the electrocardiograph, cords, and accessories according to local laws.
Do not dispose of this product as unsorted municipal waste. Prepare this product for reuse or
separate collection as specified by Directive 2002/96/EC of the European parliament and the
Council of the European Union on Waste Electronic and Electrical Equipment (WEEE). If this
product is contaminated, this directive does not apply. For more specific disposal information,
see www.welchallyn.com/weee, or contact Welch Allyn Customer Service at +44 207 365 6780.
34 Maintenance CP 50™ and CP 50 Plus™ 12-lead resting electrocardiograph