Guidance and manufacturer’s declarations, Emc compliance, Emmissions and immunity information – Welch Allyn CP 50 Plus 12-lead resting electrocardiograph - User Manual User Manual
Page 51
Guidance and manufacturer’s declarations
EMC compliance
Special precautions concerning electromagnetic compatibility (EMC) must be taken for all
medical electrical equipment. This device complies with IEC EN 60601-1-2:2007.
•
All medical electrical equipment must be installed and put into service in accordance
with the EMC information provided in this document and the Welch Allyn website:
http://www.welchallyn.com/apps/products/product_category.jsp?catcode=CARDIO.
•
Portable and mobile RF communications equipment can affect the behavior of
medical electrical equipment.
The electrocardiograph complies with all applicable and required standards for
electromagnetic interference.
•
It does not normally affect nearby equipment and devices.
•
It is not normally affected by nearby equipment and devices.
•
It is not safe to operate the electrocardiograph in the presence of high-frequency
surgical equipment.
•
However, it is good practice to avoid using the electrocardiograph in extremely close
proximity to other equipment.
Emmissions and immunity information
For information about electromagnetic compatibility (EMC), see the Welch Allyn website.
http://www.welchallyn.com/apps/products/product_category.jsp?catcode=CARDIO
47