Clarion VRX633R - Manual (Page 15)

VRX633R
19
English
Owner
’s manual
Auto store
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequentially.
If 6 receivable stations cannot be received, a pre-
viously stored station remains unoverwritten at
the memory position.
1. Press the BND button % and select the de-
sired band. (FM or AM (MW/LW))
2. Press and hold the PS/AS button 5 for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
channels.
∗
If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in pre-
set memory in order. This function is useful when
searching for desired station in memory.
1. Press the PS/AS button 5 .
2. When the desired station is tuned in, press
the PS/AS button 5 again to continue receiv-
ing that station.
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In quick tun-
ing mode, you can quickly tune the desired fre-
quency.
1. Press the BND button % and select the de-
sired band. (FM or AM (MW/LW))
∗
If “MANU” is not lit in the display (or when the
panel is closed, if the indicator “SRCH” is lit),
press and hold the BND button
% for 1 sec-
ond or longer. “MANU” appears in the display
(or when the panel is closed, the indicator
“SRCH” goes off) and manual tuning is now
available.
2. Tune into a station.
● Quick tuning:
Press and hold the right or left side of the
SEARCH button
2 for 1 second or longer to
tune in a station.
● Step tuning:
Press the right or left side of the SEARCH but-
ton
2 to manually tune in a station.
Note:
• Manual tuning is cancelled if you do not oper-
ate the unit for 7 seconds or longer.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding
PRESET button
# recalls the stored radio fre-
quency automatically.
1. Press the BND button % and select the de-
sired band. (FM or AM (MW/LW))
2. Press the corresponding PRESET button #
to recall the stored station.
∗
Press and hold one of the PRESET buttons #
for 2 seconds or longer to store that station into
preset memory.
Manual memory
1. Press the BND button % and select the de-
sired band. (FM or AM (MW/LW))
2. Select the desired station with seek tuning,
manual tuning, or preset tuning.
3. Press and hold one of the PRESET buttons
# for 2 seconds or longer to store the cur-
rent station into preset memory.
Radio Operations