Clarion VRX633R - Manual (Page 37)

VRX633R
41
English
Owner
’s manual
Always turning on the button
illumination on the operation panel
Note:
• The following operation is enabled when the panel
is open.
The button illumination on the operation panel
when the display is turned upward, can be
switched between “ON” and “OFF”.
● “ON”: Button illumination on the operation
panel turns on for 5 seconds;
● “OFF” : Button illumination is always on when
the power is turned on;
1. When the panel is open, press the ADJ button
£ to show the adjustment selection display.
2. Operate the JOYSTICK § upward or down-
ward and select “AUTO ILL” to show “ON” and
“OFF” in the menu bar.
3. Operate the JOYSTICK § rightward or left-
ward to select either position to be set and
press the ENT at the center of the JOYSTICK
§ for setting.
4. Press the ADJ button £ to return to the pre-
vious mode.
∗
To set “ON” again, switch “OFF” to “ON” manually.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for TV stations and CD
changer. The numbers of titles that can be en-
tered for each mode are as follows.
∗
You cannot enter titles with the unit in Seek, Pre-
set Scan, Auto store (TV), Scan, Repeat or Ran-
dom (CD changer, MD changer) mode. Cancel
each of those operations before entering titles.
1. Press the FNC button 1 to select the mode
you want to enter a title (CD changer or TV).
2. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
3. If you press and hold the TITLE button ¢ for
1 second or longer, the display switches to
the title input mode display.
Mode Number of titles
TV mode 15 titles
CD changer mode Number of titles
DCZ628 connected 100 titles
CDC655z connected 60 titles
CDC655Tz connected 100 titles
CDC1255z connected 50 titles
Other Functions
4. Operate the JOYSTICK § upward or down-
ward, rightward or leftward and move the cur-
sor to the character to be entered. Press the
ENT at the center of the JOYSTICK
§ .
∗
When the cursor is at the lower/upper limit of
the display, operate the JOYSTICK § upward
or downward, the character string of the follow-
ing line appears.
“-->” :
Space
“<--” : Backspace
“--I--” : Centering
5. Repeat the step 4 to enter the complete title.
6. Press and hold the ENT at the center of the
JOYSTICK § for 2 seconds or longer to store
the title into memory and cancel title input mode.
Title list play
You can display a list of titles, then select the disc
or broadcast station to listen to from that list.
∗
You can not display a title list with the unit in Seek,
Preset Scan, Auto store (Tuner, TV or DAB), Scan,
Repeat or Random (CD changer or MD changer)
mode. Cancel those operation modes before to
display a title list.
1. With the unit in radio, CD/MD changer, TV or
DAB mode, press the TITLE button ¢ . A title
list is displayed. The following functions can
be carried out in a title list display.
● TUNER: PS name (for RDS) of frequency
stored in the presets 1 to 6 or frequency is
displayed;
● DAB: Service label of a channel stored in
the presets 1 to 6 is displayed. When there is
not any service label, “---------” is displayed.
● CD/MD changer: DISC titles for discs 1 to
6 are displayed (By changing over a display
page in case of 12-CD changer, disc 7 to 12
can be displayed). When there is not any disc
in a changer, ”---------” is displayed.
● TV: A title of a channel stored in the pre-
sets 1 to 6 or a channel number is displayed.
2. Operate the JOYSTICK § upward or down-
ward to select one of the items 1 to 6. Press
ENT at the center of the JOYSTICK
§ to re-
produce the selected broadcast station or
disc.
∗
In case of 12-CD changer, move the cursor to
disc 6 and then operate the JOYSTICK
§
downward to change over to a list display of
discs 7 to 12.
3. Press the TITLE button ¢ again to return to
the STANDARD display.