Workrite Series VALUE Assembly Instructions for Tables with Right Front Crank - Manual (Page 5)

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 5
Sonoma Series™ VALUE Workcenters - Assembly Instructions for Tables with Right Front Crank
3
4
a
b
Front
Attach Top Brackets to Legs (repeat for each leg)
Attach Top Bracket to smallest end of each leg using two
Button head Machine Screws and Lock Washers for each leg.
Discard screws
Front
Attach Feet (repeat for each leg)
Remove and discard silver transit screws securing
plates to bottom of legs.
DO NOT REMOVE CENTER SCREW OR PLATE.
Insert Foot Caps into ends of each Foot.
Screw in Leveling Glides.
Slide feet onto legs and attach with two Button
head Machine Screws and Lock Washers.
For 2-Leg Tables, proceed to step 8.
a
b
B, C or D
S & T
K
J or I
L
S & T
E or F
For 3-Leg
tables, Leg 2
(center leg)
uses the short
Top Bracket (J).
For 3-Leg
tables, Leg 2
(center leg)
uses the short
Foot (F).