Workrite Series VALUE Assembly Instructions for Tables with Right Front Crank - Manual (Page 6)

6 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Sonoma Series™ VALUE Workcenters - Assembly Instructions for Tables with Right Front Crank
5
6
Center Leg
Left Leg
Right Leg
For 3-Leg Tables: Attach Crossbar Brackets
Turn legs upside down.
Remove nuts and lock washers from leg studs.
Slide Crossbar Brackets onto studs and reinstall
nuts and lock washers. Note how the flange orients
to the leg.
a
b
a
b
b
B
C
D
P
P
Q
b
For 3-Leg Tables: Secure Center Leg to Table
For base-only products, proceed to step 7.
Attach Leg 2 (center leg) to table using four Wood
Screws provided. Use locating holes. If you use an
electric screwdriver, be sure it is on the lowest torque
setting to avoid stripping the threads.
C
A
V Set at
lowest
torque.